Dolphin CT60 Mobile Computer 77
About Serial and USB Communications
You can use these Dolphin CT50 series accessories to transmit data to and receive
data from another device through serial or USB communications:
• Vehicle dock
• HomeBase
• Ethernet HomeBase
• USB snap-on adapter
• RS-232 DEX adapter
For information on these accessories, contact your local sales representative.
USB Troubleshooting
• If you have a problem with your workstation computer recognizing the USB
device, try downloading and installing the Honeywell-aidc-usb-driver. The
driver is part of the Honeywell_Mobility SDK_Android software.zip file. To learn
where to get the software, see Developer Information on page 79.
• Check to make sure you have enabled the USB for file transfer. To learn more, see
Configure USB Connection and Transfer Files on page 22.
Use Bluetooth or USB Tethering to Share a Data
Connection
You can share your mobile computer data connection with another device through
a USB tethering or Bluetooth tethering connection.
Minimum requirements for USB Tethering
• The mobile phone must have an Android 9 OS or later.
• A CT60 compatible USB communication accessory.
Set up and Connection
1. Connect the USB communication accessory to both devices.
2. On the CT60, change the USB Preference setting from USB Charging to USB
tether. See page 22 to learn how to change the USB Preference setting.
3. Swipe up from the bottom of the Home screen to access all apps.
4. Tap Settings > Network & tethering > Hotspot & tethering.
To Next Page
Loading...
