14 Dolphin CT60 Mobile Computer
Once you complete the Setup Wizard, the Welcome screen no longer appears when
you power on the computer and Provisioning mode is automatically turned off
(disabled). Scanning a bar code to install of applications, certificates,
configuration files, and licenses on the computer is restricted. To learn more About
Provisioning Mode, see page 79.
Unlock the Screen
The screen lock automatically activates every time the computer is turned on or
when the computer wakes from sleep mode.
• Swipe up from the lock icon at the bottom of the screen.
The level of security provided depends on the type of lock set (e.g., Swipe, Pattern,
PIN, or Password). The default setting (Swipe) provides no protection against
unauthorized access to your computer.
Change the Screen Lock to Protect the Computer
After you start using the computer, you should change the screen lock to prevent
unauthorized persons from accessing the computer without a password, pin, or
pattern to unlock the touch screen once it has been locked.
The recommended setting for the Screen Lock is to enable a Password lock. Use a
strong password value (e.g., include numbers, characters, special characters, and
mix character case).
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Security & location > Screen lock.
3. Choose one of the following options:
• None
• Swipe
• Pattern
• PIN
• Password
4. Follow the on-screen prompts to complete the setup.
5. Exit the Settings app.
To Next Page
Loading...
