74 Dolphin CT60/CT60 XP Mobile Computer User Guide
About Network Communications
You can easily add the mobile computer to your wireless or wired data collection
network. Connect the CT60 your computer using:
• 802.11 a/b/g/n/ac radio communications.
• Ethernet communications.
• Bluetooth communications.
• USB and serial communications.
Connect to a Wi-Fi Network
The computer contains an 802.11 a/b/g/n/ac radio to transfer data using wireless
communications. Before you connect to a Wi-Fi network, you need to know about
your network security protocol and its required credentials.
By default, the 802.11 radio is disabled.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Network & Internet > Wi-Fi.
3. Tap Off to toggle Wi-Fi radio On . A list of discovered networks appears.
4. On the list, tap a network name to initiate a connection.
To add a network if it does not appear on the list:
a. Navigate to the end of the discovered network list, and then tap
Add network.
b. Type the Wi-Fi network name (SSID).
c. Choose a security protocol and add any required information.
d. Tap Save.
5. Enter any required information if the network is secured (e.g., password, key or
certificate name).
IP address IP address associated with the device.
Wi-Fi MAC
address
Displays the Media Access Control address for the device.
Bluetooth address Displays the Bluetooth address for the device.
Up time Displays the amount of time the device has been up without restarting.
Software
component
version
Select to view software component version list.
Build number Kernel number installed.
* If your WWAN model supports a dual SIM card setup, both sim slot 1 and sim slot 2 will be listed.
Setting Description
To Next Page
Loading...
Need help?
General
