Honeywell Enhanced Micro TDC 3000 - Page 122

Enhanced Micro TDC 3000 User’s Manual 5-40 9/95
5.4.3
(8) Rotation Setting (Only available for HM-4821-D)
1. Select MODE 1 by the mode selection switch, and press the SELECT button
until the ROTATION indicator lights up.
RGB123
COLOR
53970
SELECT
MODE
1
2
2. Adjust the rotation by pressing the ADJUST button (+) or (–).
RGB123
COLOR
53971
SELECT ADJUST
- +
3. After adjusting the rotation, if you want to:
- Store the adjusted data, press the STORE button.
RGB123
COLOR
53972
SELECT ADJUST
- +
STORE
- Continue other adjustment by pressing the SELECT button.
RGB123
COLOR
53973
SELECT