Enhanced Micro TDC 3000 User’s Manual 4-23 9/95
4.8.2
4.8.2 Area Database Prebuilt Configuration Data
The following data is in file AREA01 on the &D01 volume. It is presented in the same
order as on the Area Configuration Menu.
Unit Assignment Configuration
Units 01-10
Unit IDs: 01 through 10
Initially Assigned?: Units 01 through 10 YES
Group Display Configuration
Group number: 1
Group title: MICRO TDC 3000
Points: AM_REG, APM_REG,
APM_AIF, APM_AOF, APM_AIC,
APM_AOC, APM_NUM, APM_FLG
In the trend set? NO (all 8 points)
Default trend timebase: 20 MINUTES
Associated Display Definition:
Screen 0, Type DETAIL
Point ID PM_SEG
Help Display Definition:
Screen 0, Type PMSTAT
Process NTWK No.: 1, Box/Node: 3
Group number: 2
Group title: MICRO TDC 3000
Points: APM_RPV, APM_LOG,
APM_DC, APM_DIF, APM_DIC,
APM_DOC, APM_TMR,
In the trend set? NO (all 7 points)
Default trend timebase: 20 MINUTES
Associated Display Definition:
Screen 0, Type DETAIL
Point ID: APM_SEQ
Help Display Definition:
Screen 0, Type PMSTAT
Process NTWK No.: 1, Box/Node: 3
Unit Trend Display Configuration
Trend display number: 1
Trend title: MICRO TDC 3000
Trend timebase: 2 HOURS
Axis set definition: not configured
Related/Help Displays: Null
System Status
Associated Display Definition:
Screen number: 0
Display type: SCHEM
Schematic name: NCF_STS1
Help Display Definition:
Screen number: 0
Display type: SCHEM
Schematic name: KEYLOCK
Reports
Not Configured
Pathname Catalog Configuration
Button Config.File Vol. ID: &D01
File Name: BUTTON01
Schematic Pathnames:
NET>PICS $F1>PICS $F2>PICS
$F1>DIA1 $F2>DIA1 NET>&DSY
Process Module Group
Group number: 1
Group title: MICRO TDC 3000 CL PROGRAM
Process Module ID: APM_SEQ
Related Display: 001: Screen 0, Type PMSTAT
Process NTWK No.: 1, Box/Node: 3
Related Display: 002: Screen 0, Type MSGSUM
Related Display: 003: Screen 0, Type UNITSUM
To Next Page
Loading...
Need help?
General
