Enhanced Micro TDC 3000 User’s Manual 4-4 9/95
4.2.1
4.2.1.1 Loading Prebuilt Network Configuration Data
In the steps that follow, you will load US 1 with the Universal Personality and the prebuilt
NCF file. The Universal Personality allows you to switch quickly between the Operator’s
Personality and the Engineering Personality. The Engineering Personality is used to
configure the system or to change system configuration.
1. If not already off, turn off the power switch on tower 1 (the right tower) and on
tower 2 (the left tower) for a few seconds and then back on. Loss/return of power
in tower 2 resets the node(s) and forces the HM to autoboot. Loss/return of power
in tower 1 resets the nodes in that tower. Wait for > to appear in the upper left
corner of the screen of the monitor connected to tower 1.
2. On the Operator’s Keyboard, press LOAD. N,1,2,3,4,X appears.
3. On the Operator’s Keyboard, press the ALPHA SHIFT key (until the indicator
comes on), key in N, then press ENTER. Several messages appear, ending with
OPR, UNP?
4. On the Operator’s Keyboard, key in UNP and press ENTER.
5. Wait a few minutes for the System Status display to appear. Press CTRL/HELP on
the Engineering Keyboard to go to the Engineering Main Menu.
6. The Engineering Main Menu should be on the screen. On the Engineering
Keyboard, press PF1. Enter the schematic name KEYLOCK and press ENTER.
Select the ENGR target. For more information on how to use the access keylock,
refer to subsection 5.3.3, Keyswitch Access Levels .
Set the Time and Date—
7. Select the SYSTEM STATUS display target on the Engineering Menu. On the
System Status display, select the TIME/DATE target.
8. When the TIME/DATE CHG targets appear, select the DATE CHG target. Key in
the current day, month, and year (for example, 15 MAR 92) and press ENTER.
The current date should appear in the upper right corner of the display.
9. Select the TIME CHG target and then key in the time in hours and minutes (for
example, 14 25). Press ENTER and the current time should appear in the upper
right corner of the display.
To Next Page
Loading...
Need help?
General
