Honeywell Enhanced Micro TDC 3000 - Page 97

Enhanced Micro TDC 3000 User’s Manual 5-15 9/95
5.4.1
2. CONT (contrast) control
Turn this control to adjust the contrast of the display.
More Less
3. RRC (Raster Rotation Circuit) control
Turn this control to correct the raster tilt.
Rightward Leftward
Raster Tilts
NOTE: Using this control also removes poor purity from around the CRT, which is
generated when swiveling the unit.
4. PCC (Pincushion Correction Circuit) control
Turn this control to correct both right and left side distortion of the display.
Barrell Pincushion
5. V-SIZE (vertical size) control
Turn this control to adjust the vertical size of the display.
Enlarge Lessen
6. V-POSI (vertical position) control
Turn this control to adjust the center of the display vertically.
Up Down
7. H-SIZE (horizontal size) control
Turn this control to adjust the horizontal size of the display.
Enlarge Lessen