Fire Alarm Control Panel IQ8Control C / M
136 FB 798951.10.GB0 / 04.15
Wiring FACP IQ8Control
M
+
-
F4
+UBext T2A
BR7
Printer
System connector 2
Printer
GND
X23 Printer
+UBext.
Basic module
IQ8
Control
Ribbon cable
GND
switched +12 V ext.
4
Fig. 121: Wiring Printer with paper take-up reel
Observe permitted torque (max. 0.4 Nm) of the terminals!
Customer data programming with tools 8000
The printer must be programmed with the tools 8000 programming software from V1.15 or higher as a
>Printer with take up reel for Serial 2< in the panel configuration.
Fig. 122: Selecting the printer
To Next Page
Loading...
