Honeywell Excel 10 W7752D - Page 67

EXCEL 10 FCU CONTROLLER LNS PLUG-INS USER GUIDE
65 EN2B-0285GE51 R0909
Table C5. Unused Variables for Excel 10 FCU Controllers
NV name field name
engineering units:
English (metric) or states
plus range
digital
state
or
value
default comments
nciApplVer not_used1 UBYTE Reserved for future use.
nciApplVer not_used2 UBYTE Reserved for future use.
nciCntrlSettings reserve 7 bits Reserved for future use.
nciFcuConfig not_used 4 bits Reserved for future use.
nciWallMod spare_field[0] UBYTE Reserved for future use.
nciWallMod spare_field[1] UBYTE Reserved for future use.
nvoFcuStatus not_used 3 bits Not used.
nvoFcuStatus spare_field[0] WORD Not used.
nvoFcuStatusP not_used Same as nvoFcuStatus Not used.
nvoFcuStatusP spare_field[0] Same as nvoFcuStatus Not used
nvoSensor not_used 6 bits Reserved for future use.
nvoStatus out_of_limits Bit Not supported
nvoStatus open_circuit Bit Not supported
nvoStatus out_of_service Bit Not supported
nvoStatus mechanical_fault Bit Not supported
nvoStatus feedback_failure Bit Not supported
nvoStatus over_range Bit Not supported
nvoStatus under_range Bit Not supported
nvoStatus electrical_fault Bit Not supported
nvoStatus unable_to_measure Bit Not supported
nvoStatus fail_self_test Bit Not supported
nvoStatus self_test_in_progress Bit Not supported
nvoStatus Lock ed_out Bit Not supported
nvoStatus manual_control Bit Not supported
nvoStatus in_override Bit Not supported
nvoStatus reserved1 Bit Not supported
nvoStatus reserved2 Bit Not supported
nvoUnitStatus econ_output SNVT_lev_percent Not supported