Honeywell Field Device Access Point - Page 42

FDAP CONFIGURATION
OWDOC-X256-en-323A
42
Communication
Redundancy
• Displays the Communication
Redundancy State, Communication
Redundancy Ratio details
• The Communication Redundancy
State is the redundancy
communication link between the
primary and secondary parent
• Select the Communication
Redundancy Alarm check box to
enable the "Non-Redundant
Communication" alarm for the FDAP
ATTENTION
This alarm is applicable only when the
FDAP is acting as an FDAP router.
ISA100 Protocol
Version
Displays the supported version of ISA100
protocol.
Diagnostics
Displays the ISA100 Wireless radio
diagnostics details.
Network Time
Protocol
Displays the Time Master Preferred, Round
Trip Time, Time Sync Drift details.
Time Master Preferred: Time Master
preferred is set if the Node/Device is NTP
Sync capable or incapable.
Time Sync Drift: Time Sync Drift is the time
drift of the Node/Device from its Parent in
clock ticks.
Round trip time: The duration of the
response of the ping from the system
manager.