Consists of the over-the-air provisioning
parameters for enabling and disabling over-
the-air provisioning. It also displays the time
remaining for over-the-air provisioning.
Display the bandwidth consumed by FDAP
or FDAP Gen3 or FDAP Gen3 Anchor as
router and approximate device can join
under this FDAP or FDAP Gen3 or FDAP
Gen3 Anchor as router.
Bandwidth statistics displays
Overall bandwidth consumed and the
breakup of ISA100 and WirelessHART device
bandwidth consumed.
Approximate ISA100 device with 10sec or
above publish rate can join the network
Approximate WirelessHART device with 8sec
or above publish rate can join the network.