Honeywell Field Device Access Point - Page 44

FDAP CONFIGURATION
OWDOC-X256-en-323A
44
BLE options
Display Key: Select the Display Key check
box and click apply option to view the Pass
key.
Pass key: Pass key is a six-digit numeric key
provided for Bluetooth pairing. Update the
new key and click Apply option to change the
pass key.
Status: Status of Bluetooth is shown in the
Status field.
Enable button - Enables the Bluetooth
module to be ready for connection.
Disable button - Once disabled you cannot
discover the FDAP or FDAP Gen3 using the
Provisioning handheld device.
NOTE:
BLE Options are only applicable to FDAP
Gen3 and FDAP Gen3 Anchor.
Data Layer Management
Radio Power Level
Displays the transmission power level. The
default power level is 16 dBm.
Neighbor Diagnostics
Displays the neighboring devices
diagnostics like the Device Tag Name, RSSI,
RSQI, Transmit Fail, Transmit CCA Back off,
Transmit NACK, and Clock Sigma.