Displays the error distribution counter, which
corresponds to the error packet counter for
the number of bytes corrected. The error
packet counter is the total count of error
packets
received on both antennas with the Cyclic
Redundancy Check (CRC) error.
Diversity Operation: Displays the FDAP or
FDAP Gen3 antenna operational status. The
status can be Both Radios, Radio 1 or
Radio 2.
Correction Gain: Displays the correction
gain, which is the total packet corrected by
packet error correction algorithm.
Redundancy Gain: Displays the redundancy
gain, which is the minimum value of total
packets received by antenna 1 without any
packet errors + minimum value of total
packets received by antenna 2 without any
packet errors / total packets received by
antenna 1 and 2 without any packet errors.
Reset Statistics: Resets all the radio diversity
values. Click to reset all the radio diversity
values.
Ranging Technique: Displays the Ranging
technique used between Tag and FDAP Gen
3 Anchor. The following are the Ranging
Techniques.
• One way Ranging
• Two way Ranging
• Hybrid Ranging
Hybrid Techniques – Starts with One way
Ranging, during retry it switches to Two way
Ranging.
Distance Offset: Displays the minimum
expected distance between tag and FDAP
Gen 3 Anchor.
To Next Page
Loading...
