Honeywell Field Device Access Point - Page 47

OWDOC-X256-en-323A
47
NOTE:
Location Options are only applicable to FDAP
Gen3 Anchor.
Antenna Cable Length: Displays the cable
length of the antenna.
Operating mode:
• Location → Participates in
trilateration to detect tag’s location.
• Zone → Detects tag’s presence and
measures distance between tag and
anchor.
• Checkpoint → Detects tag’s
presence.
• None → Does not participate in
RTLS activities.
Check Point Type: Applicable when
operating mode is in Checkpoint.
• None → No checkpoint configured.
• Login.
• Logout.
• Mustering.
• Restricted.
• Storage.
Zone: Zone name where FDAP Gen 3 Anchor
is installed.
Site: Site name where FDAP Gen 3 Anchor is
installed.
Area: Area name where FDAP Gen 3 Anchor
is installed.
Altitude Detection: Enable/disable altitude
detection in FDAP Gen 3 Anchor.
• 0 - Disable → Disable altitude
detection in FDAP Gen 3 Anchor.
• 1 - Enable → Enable altitude
detection in FDAP Gen 3 Anchor.