FS24X/FS20X DTM Manual, Issue 1
18
4.3 PACTware menu structure and items
By right-clicking on the device DTM you will find a menu list. Some menu items are character-
istic for DTM and some for frame (in the shown example PACTware):
4.3.1 DTM specific menu items
• Measured value (offers real time information about the HART loop current (mA and
%), the fire detection status and the device condition.
• Parameter (offers information regarding the complete device parameters which can be
set according to your measurement application)
o Online parameterization
o Parameterization (which refers to offline parameterization)
• Diagnosis (offers real time information about the device status)
• Additional functions (offers information regarding the DTM, like version number, man-
ufacturer, registration status, etc)
o About DTM
• Load from device (is used for uploading data set from the device to the offline param-
eterization). Perform this operation in order to store the device configuration in the
Frame Application’s project file or database.
• Store to device (is used for downloading the offline parameterization data to the de-
vice). Perform this operation in order to download and restore a device configuration
from a saved project to the device.
4.3.2 Frame specific menu items
The other items shown in the figure above are frame characteristic items. In the following
pages we will describe the DTM characteristic items. For more information regarding the
Frame items, please check www.pactware.com or the respective operating manual of your
Frame Application.
To Next Page
Loading...
