FS24X/FS20X DTM Manual, Issue 1
2
3 Software installation
3.1 Required software / software components
In order to be able to use the FS24X/FS20X HART DTM and to go online with the device you
need the following components:
• FDT Frame application (PACTware or some other FDT application supporting FDT
1.2.x)
• HART Communication DTM (it represents the communication hardware needed for
connecting the field devices to the automation software): There is a free version of
HART Communication DTM available for download from CodeWrights website
(www.codewrights.de)
• Honeywell Analytics HART DTM Library
• Microsoft .NET Framework 3.5 (incl. Service Packs)/CRL2
• HART modem (RS232 or USB interfaces of the companies Endress+Hauser, Microflex
or MACTek)
3.2 DTM Toolkit downloads
Go to one of FS24X/FS20X website:
• https://www.honeywellanalytics.com/en/products/FS20X-Flame-Detector
• https://www.honeywellanalytics.com/en/products/FS24X-Flame-Detector
Select "Software"
Select "Drivers & Downloads"
Download the toolkit. It will contain the following items:
• PACTware FDT Frame
• HART Communication DTM FDT 1.2
• Most recent version of the Honeywell Analytics DTM Library
3.3 System requirements
3.3.1 System resources
Proper execution of the DTMs requires a standard PC with at least following system resources:
• 1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor with at least 2 cores
• 1 gigabyte (GB) RAM (32-bit) or 2 GB RAM (64-bit)
• Screen Resolution at least 1024x768 pixels
• Free Hard disk space: approx. 2 GB
• Microsoft .NET Framework 3.5 (incl. Service Packs)/CRL2
3.3.2 Operating systems
The DTM will run under the following operating systems:
To Next Page
Loading...
