Galaxy Dimension Installer Manual
G-1
Appendix G: Declaration of Conformity
Compliance and Approvals
The Galaxy Dimension control panels are compatible with the relevant parts of the following standards:
• PD6662:2003 Scheme for the application of European Standards for intruder alarm
systems.
• EN50131-1:2003 Draft 9d Alarm systems - Intrusion systems - General requirements (grade 3).
• TS50131-3 Alarm systems - Intrusion systems: Part 3 Control and indicating
equipment (grade 3).
• prEN50131-5-3 Alarm systems - Intrusion systems: Part 5-3 systems using wire-free
interconnections (grade 2).
• EN50131-6:1998 Alarm systems - Intrusion systems - Power supplies (grade 3).
• EN50136-1-1:1998 Alarm systems - Alarm transmission systems and equipment - General
requirements for alarm transmission systems.
• EN50136-1-3:1998 Alarm systems - Alarm transmission systems and equipment -
Requirementsf or systems with digital communicators using the public
switched telephone network.
• EN50136-2-1:1998 Alarm systems - Alarm transmission systems and equipment - General
requirements for alarm transmission equipment.
• EN50136-2-3:1998 Alarm systems - Alarm transmission systems and equipment -
Requirements for equipment used in systems with digital communicators
using the public switched telephone network.
• CE Standards, including all EN safety and EMC standards.
• R&TTE 99/5/EC
• BS6799:1986 Code of practice for wire-free intruder alarm systems.
• DD243:2002 Installation and configuration of intruder alarm systems designed to
generate confirmed alarm conditions - code of practice.
• BSIA Guidelines for Remote Maintenance to systems installed to EN50131-1
Approvals
To Next Page
Loading...
Need help?
General
