EasyManua.ls Logo

Honeywell HD41 - Exposure

Honeywell HD41
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12 | Performance Series Fixed Minidome Camera Configuration Guide
www.honeywellvideo.com
4. Select the desired SHUTTER mode by pressing the Left or Right OSD controls.
Figure 3 DC Lens Menu
5. Press SET on RETURN to return to the SETUP menu.
Note SHUTTER: Select SHUTTER using the Up or Down OSD controls, you
can adjust the shutter speed from 1/60, FLK, 1/250 - 1/100,000.
FLK: Select FLK mode to compensate for flickering and color rolling in
fluorescent lit scenes. If FLK mode is selected, the SENS-UP function
is disabled.
Exposure
This function is used to select SENS-UP or Auto gain control.
1. On the Setup menu screen select EXPOSURE by using the Up or Down OSD
controls and press SET (see Figure 4).
Figure 4 MAIN SETUP Menu - EXPOSURE Submenu Selection
DC
BRIGHTNESS |........|........| 23
E. SHUTTER 1/60
RETURN
MAIN SETUP
LENS DC
EXPOSURE
WHITE BAL ATW
D-WDR/HSBLC OFF
HD-DNR AUTO
DAY/NIGHT COLOR
SMART-IR OFF
SPECIAL
EXIT
EXPOSURE
AGC HIGH
SENS-UP X16
RETURN

Related product manuals