28 | Performance Series Fixed Minidome Camera Configuration Guide
www.honeywellvideo.com
Gamma
Use the Gamma setting to adjust the gamma correction value. Gamma can be adjusted
from between 0.20 and 1.00.
LSC
The LSC function is used for compensating the brightness differences of the center of the
lens and its peripheries. When set to ON, LSC can be adjusted from 0 to 30.
1. Select LSC in the ADJUST menu by using the Up and Down OSD controls.
2. Change the LSC selection by using the Left and Right OSD controls.
3. Set LSC to ON and press SET to open the LSC menu (see Figure 29).
4. Change the LSC set level, as needed, from 0 to 30.
5. Select RETURN and press SET.
Figure 29 ADJUST Menu - LSC Submenu Selection
Language
The Language option is used to change the language of the OSD menus.
1. Select LANGUAGE in the ADJUST menu by using the Up and Down OSD controls.
1. Change the LANGUAGE selection by using the Left and Right OSD controls (see
Figure 28). You can select the language from: English, Russian, Spanish, Italian,
French, Turkish, Chinese 1 and 2, Korean, and Japanese.
Communication
This feature is not currently supported.
ADJUST
SHARPNESS
15
MONITOR LCD
GAMMA 0.55
LSC ON
LANGUAGE ENGLISH
COMMUNICATION
OFF
DEFECT AUTO
RETURN
LSC
SET LEVEL
10
RETURN
To Next Page
Loading...
