Configuring the Camera | 27
800-12003V1 - A - 01/2013
Return
Select this option to save settings from the SPECIAL menu and return to the Main SETUP
menu.
Adjust Submenu
When the SPECIAL menu screen is displayed (see Special Menu on page 19), select
ADJUST using the Up and Down OSD controls and press SET.
Figure 28 SPECIAL Menu - ADJUST Submenu Selection
Sharpness
You can adjust the SHARPNESS level from 0 to 30 (see Figure 28).
Monitor
The Monitor setting is used to specify the type of monitor you are using, and adjust the
video signal so it can be optimally displayed on that monitor.
1. Select MONITOR in the ADJUST menu by using the Up and Down OSD controls.
2. Change the MONITOR selection by using the Left and Right OSD controls (see
Figure 28). Monitor options are:
• LCD: Select this option when you are using an LCD monitor with the camera.
• CRT: Select this option when you are using an CRT monitor with the camera.
ADJUST
SHARPNESS
15
MONITOR LCD
GAMMA 0.55
LSC OFF
LANGUAGE ENGLISH
COMMUNICATION
OFF
DEFECT AUTO
RETURN
SPECIAL
CAMERA TITLE OFF
ADJUST
MIRROR OFF
MOTION DET OFF
PRIVACY OFF
SYNC INT
RESOLUTION NORMAL
RESET NO
RETURN
To Next Page
Loading...
