EasyManua.ls Logo

Honeywell HD41 - Day; Night

Honeywell HD41
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18 | Performance Series Fixed Minidome Camera Configuration Guide
www.honeywellvideo.com
Day / Night
Picture can be displayed in either color or black and white.
1. Select DAY / NIGHT using the Up or Down OSD controls on the SETUP menu
screen (see Figure 15).
Figure 15 MAIN SETUP Menu - DAY/NIGHT Selected
2. Select the desired Day/Night mode (COLOR, BW, EXT, or AUTO) using the Left and
Right OSD controls.
COLOR The picture is always displayed in color.
BW The picture is always displayed in black and white. Select BW using the Left and Right
OSD controls and open the menu to activate BURST option.
EXT Day/Night control performed by photocell on the camera board. This option is NOT
supported by the HD41X camera.
AUTO In this mode, the camera automatically switches to COLOR in normal conditions
and switch to BW mode when ambient illumination is low.
Press SET to set the switching time or Day>Night(AGC), Night>Day(AGC) in AUTO mode.
Figure 16 Day/Night AUTO Menu
MAIN SETUP
LENS DC
EXPOSURE
WHITE BAL ATW
D-WDR/HSBLC OFF
HD-DNR AUTO
DAY/NIGHT COLOR
SMART-IR OFF
SPECIAL
EXIT
D&N-AUTO
BURST OFF
DAY>NIGHT

21
NIGHT>DAY

9
DELAY TIME

2
RETURN

Related product manuals