50489/GTEX Chem IIC/1805 UTImeter Gtex Chem IIC
6.7. Gas tightness
All parts are assembled together with either
gaskets or O-rings, that makes the device
completely tight.
The sealing of the axle holding the tape with the
mechanical housing is ensured by a special V-
shape gasket.
6.8. Gaskets
On UTImeter Gtex Chem models, gaskets which
are in contact with the liquid are made in FFKM.
6.9. Housing and lid
These parts are made in aluminium coated with
PA11 (Rilsan®).
6.10. Others
The tape is coiled on the axle which holds also the
electronic box and the display unit.
The axle is assembled to the electronic box and
can be locked at discrete positions by means of a
stopping mechanism in the crank. Pull the crank to
free the stopping mechanism.
The storage tube is threaded to the frame.
The storage tube is equipped with a quick-
connector which fits on the HERMetic valves.
To Next Page
Loading...
