Honeywell HERMetic UTImeter Gtex Chem IIC - Translation of Messages; Selecting the Temperature Scale

50489/GTEX Chem IIC/1805 UTImeter Gtex Chem IIC
30
8.2. Translation of messages
English German French
Language Sprache Langues
No Msg KeineMel LigneHS
Error Fehler Erreur
English Deutch Francais
Invalid Ungültig Invalide
Unknow Unbekan. Inconnu
8.3. Selecting the temperature scale
The temperature can be displayed either in Celsius or Farenheit degrees. Refer to Figure 9-3.
Figure 9-3
- Switch on the equipment,
- Wait until the temperature is displayed,
- Press on "+" to enter the settings menu,
- Press on "enter", "LED menu" is displayed,
- Press on "+"; "T. unit" is displayed,
- Press on "enter",
- Select the scale by pressing on "+" one or more times, the pointer shows the scale selected,
- Press "-" two times to come back in measurement mode.
The new setting is stored in the permanent memory.
ON
UTImeter
Battery
Init.
*********
25.94
°
C
Setting
s
T. unit
>
°
C
°
F
°
C >
°
F
Ver x.xx
LED menu



97%
-
-
-
E
E
-
+
+
+
+
+