Honeywell HERMetic UTImeter Gtex Chem - Selecting the Temperature Scale

29
9.3 Selecting the temperature scale
The temperature can be displayed either in Celsius or Farenheit degrees. Refer to Figure 9-3.
• Switch on the equipment,
• Wait until the temperature is displayed,
• Press on “+” to enter the settings menu,
• Press on “enter”, “LED menu” is displayed,
• Press on “+”; “T. unit” is displayed,
• Press on “enter”,
• Select the scale by pressing on “+” one or more times,
the pointer shows the scale selected,
• Press “-” two times to come back in measurement
mode.
ON
UTImeter
Battery
Init.
*********
25.94°C
Settings
T. unit > °C °F
°C > °F
Ver x.xx
LED menu
97%
-
-
-
E
E
- +
+
+
+
+
░ ░ ░ ░ ░
Figure 9-3
The new setting is stored in the permanent memory.