Configuration | 53
800-22740 - A - 02-2017
Figure 3-19 IP Filter-Trusted Sites Configuration Interface
3. Click to enable Trusted Sites, and only the listed IP addresses can access the current
DVR.
4. Click Add to add a site to the list. The Add window opens.
5. Select either IP Address or IP Section, IPv4 or IPv6, and then enter an URL. Click Save
to add the address to the list and return to the IP Filter - Access Right window.
6. Click Save to save the changes.
Configuring Email
Click Email in the Network configuration interface to open the Email configuration interface.
Figure 3-20 Email Configuration Interface
To Next Page
Loading...
