Honeywell L5210 Series User Manual

LYNX Touch Installation and Setup Guide
- 43 -
Programming the Control
Program Reporting (Continued)
SCREEN ACTION
Report All
Press to Report All
Note: This field is not available on the LYNX Touch L7000/L7000CN.
Select “Report All”. The System toggles between “Press to Report All” and “Report All Set”.
If “Report All” is selected all reporting options will be “Enabled”. Select the “Save” key to
return to the Reporter options screen.
Report Alarms
Disabled
Note: This field is not available on the LYNX Touch L7000/L7000CN.
Select “Report Alarms”. The System toggles between “Disabled” and “Enabled”.
Report Troubles
Disabled
Note: This field is not available on the LYNX Touch L7000/L7000CN.
Select “Report Troubles”. The System toggles between “Disabled” and “Enabled”.
Report Open/Close
Disabled
Note: This field is not available on the LYNX Touch L7000/L7000CN.
Select “Open/Close”. The System toggles between “Disabled” and “Enabled”.
Report Tests
Disabled
Note: This field is not available on the LYNX Touch L7000/L7000CN.
Select “Report Tests”. The System toggles between “Disabled” and “Enabled”.
Follow Me Phone 2
Note: The Follow Me feature is not available on the LYNX Touch L7000/L7000CN.
Select “Follow Me Phone 2” to program the “Follow Me” Reminder telephone number 2.
Phone Type
None
Note: This field is not available on the LYNX Touch L7000/L7000CN.
Select “Phone Type”. The System toggles between “None” and “Follow Me”.
Phone Number
Note: This field is not available on the LYNX Touch L7000/L7000CN.
Select “Phone Number”. Enter the “Follow Me” Phone Number 2 on the displayed keypad.
Report All
Press to Report All
Note: This field is not available on the LYNX Touch L7000/L7000CN.
Select “Report All”. The System toggles between “Press to Report All” and “Report All Set”.
If “Report All” is selected all reporting options will be “Enabled”. Select the “Save” key to
return to the Reporter options screen.
Report Alarms
Enabled
Note: This field is not available on the LYNX Touch L7000/L7000CN.
Select “Report Alarms”. The System toggles between “Disabled” and “Enabled”.
Report Troubles
Enabled
Note: This field is not available on the LYNX Touch L7000/L7000CN.
Select “Report Troubles”. The System toggles between “Disabled” and “Enabled”.
Report Open/Close
Disabled
Note: This field is not available on the LYNX Touch L7000/L7000CN.
Select “Open/Close”. The System toggles between “Disabled” and “Enabled”.
Report Tests
Enabled
Note: This field is not available on the LYNX Touch L7000/L7000CN.
Select “Report Tests”. The System toggles between “Disabled” and “Enabled”.
Report Selection
Select “Report Selection”. The System displays the following options:
Arm Away Arm Stay
Disarm Exit Error
Recent Closing Event Log Full
Trouble Trouble Restore
Use the down  arrow to scroll to the next page of options.
Alarm Restore Alarm Cancel
Test Test Restore
Bypass Bypass Restore
AC Loss AC Loss Restore
Use the down  arrow to scroll to the next page of options.
Low Battery Low Battery Restore
RF Low Battery RF Low Battery Restore
Arm Away
Enabled
Select “Arm Away”. The System toggles between “Disabled” and “Enabled”.

Honeywell L5210 Series Specifications

General

Brand	Honeywell
Model	L5210 Series
Category	Security System
Language	English