2
This Miller Twin Turbo G2 Connector Instruction Supplement must be used
in conjunction with the Miller Self-Retracting Lifelines & Fall Limiters
User Instruction Manual (I267).
1.0 Purpose
The Miller Twin Turbo™ G2 Connector is a compact, lightweight device uniquely engineered to
allow two compatible personal fall limiters (or self-retracting lifelines) to be connected to the back
of a user’s harness for continuous 100% tie-off fall protection.
Table of Contents
1.0 Purpose............................................................................................. 2
2.0 Miller Twin Turbo G2 Fall Protection System & Components........... 3-4
3.0 General Requirements, Warnings and Limitations............................ 4
4.0 Assembly and Installation................................................................. 4-10
4.1 Installing Optional Harness D-Pad Clip to Harness Back D-Pad
4.2 Assembling and Installing Twin Turbo G2 Fall Protection System
(with optional Harness D-Pad Clip)
4.3 Assembling and Installing Twin Turbo G2 Fall Protection System
(without using Harness D-Pad Clip)
5.0 Use.................................................................................................... 10
6.0 Inspection and Maintenance............................................................. 11
Product Labels.................................................................................. 32
Inspection and Maintenance Log...................................................... 33
All persons using this equipment must read, understand and follow all
instructions. Failure to do so may result in serious injury or death. Do
not use this equipment unless you are properly trained.
WARNING
!
Instructions D’utilisation - Français............................................................ 12-21
Manual de instrucciones para el usuario - Español................................... 22-31
To Next Page
Loading...
Need help?
General
