Honeywell MP Nova Mark II User Manual

Chapter 4 — Printer Configuration
32 MP Nova Mark II User Guide
USB Connection Requirements
Using NETira CT with a USB connection requires a Windows driver to be
installed and the driver to be set to “Print directly to the printer.” Other
connections (e.g., serial and LAN) do not require the Windows driver or this
setting. Install the Windows driver as described in on “Windows Driver” on
page 36. Then follow the steps below to set the driver settings:
1 Open the list of installed printers on your PC.
• Windows XP: Click the Start button > Settings > Printer and Faxes.
• Windows 7: Click the Start button > Devices and Printers.
2 Right-click on the printer and select Properties from the drop-down menu.
3 In the driver Properties window, click on the Advanced tab.
4 Click the “Printer directly to the printer” radio button. Then, click OK. USB
connections will now be available for NETira CT.

Honeywell MP Nova Mark II Specifications

General

Brand	Honeywell
Model	MP Nova Mark II
Category	Printer
Language	English