Honeywell MS-10UD Series User Manual

Central Station Communications
128 MS-5UD/MS-10UD Series PN 52626:B 8/01/2008
The table below shows UL listed receivers which are compatible with the MS-5UD and MS-10UD.
1. With 685-8 Line Card with Rev. 4.4d software
2. With 124060V206B and 124063 Line Card Rev. B
3. With version V2.4 Receiver and 126047 Line Card Rev. G
4. With 124077V2.00 Receiver and 126047 Line Card Rev. M
5. With V.7301 Receiver S/W
6. With 01.01.03 Receiver S/W and Line Card 01.01.03
7. With software V1.86
8. With software V1.72
9. With DSP4016 and V1.6 Line Card
10. With software V3.9
IMPORTANT! It is the installer’s responsibility to ensure that the Digital Alarm Communicator/
Transmitter is compatible with the Central Station Receiver, utilized by the monitoring service,
prior to installation. The Compatibility Table provides a list of compatible receivers and
associated software versions for the receivers. Changes in the hardware and/or software by the
receiver manufacturers may affect the receiver compatibility with the FACP DACT. After
completing the installation, communication between the DACT and Central Station Receiver must
be tested and verified.
Table 5.1 Compatible UL Listed Receivers
Format
Ademco 685 (1) Ademco MX8000 (2) Silent Knight 9500 (3) Silent Knight 9800 (4) Osborne Hoffman 2000E (5) Radionics 6600 (6) SurGard MLR2 (7) SurGard System III (8) SurGard MLR-2000 (9) FBI CP220FB (10)
0 SIA-DCS-8
   
1 SIA-DCS-20
   
2 Ademco Contact ID


Honeywell MS-10UD Series Specifications

General

Brand	Honeywell
Model	MS-10UD Series
Category	Smoke Alarm
Language	English