Honeywell MS-10UD Series User Manual

Installation
48 MS-5UD/MS-10UD Series PN 52626:B 8/01/2008
2.8.7.3 ANN-I/O Connection to FACP
The ANN-I/O connects to the FACP via the ANN-BUS as illustrated in Figure 2.23. After the
ANN-I/O is connected to the panel, it must be added to the system via FACP programming.
Figure 2.23 ANN-I/O Connection to FACP
ANN-I/O Module
MS-5UD/MS-10UD
ANN-BUS and power wiring are
supervised and power-limited
TB3

Honeywell MS-10UD Series Specifications

General

Brand	Honeywell
Model	MS-10UD Series
Category	Smoke Alarm
Language	English