Need help?Do you have a question about the Honeywell MS-5UD Series and is the answer not in the manual?
General| Category | Smoke Alarm |
|---|---|
| Type | Photoelectric |
| Battery Backup | Yes |
| Alarm Sound Level | 85 dB |
| Zones | Up to 5 |
| Voltage | 120V AC |
| Color | White |
| Power Source | 120V AC |
| Alarm Volume | 85 dB |
| Amperage | 0.5A |
| Connectivity | Wired |
| Interconnect Capability | Yes |
| Operating Temperature | 32°F to 120°F |
| Humidity Range | Up to 93% RH, non-condensing |
Lists key features and capabilities of the MS-5UD/MS-10UD FACP.
Explains the primary (AC) and secondary (battery) power connections and requirements.
Introduces programming the FACP using the keypad or computer.
Guides the programming and configuration of input zones (IDCs) and their types.
Covers the configuration and programming of Notification Appliance Circuits (NACs).
Provides instructions for performing silent and audible walktests and viewing results.
Describes how the panel behaves and displays information during trouble conditions.
Details the panel's behavior and display during alarm conditions.
Guides the calculation of AC branch circuit requirements for system power.
Explains how to calculate system current draw for different operating conditions.
Provides steps for calculating the required battery size based on system load.
To Next Page