Need help?Do you have a question about the Honeywell N3680 and is the answer not in the manual?
Instructions on creating and saving custom default settings for the scan engine.
Procedure to restore custom default settings to the scan engine.
Using Plug and Play bar codes for instant scan engine setup.
Programming the scan engine for an RS-232 serial port connection.
Programming the engine for USB PC or Macintosh keyboard interface.
Scanning country codes to program the keyboard layout for your language.
Programming keyboard styles such as Caps Lock and Shift Lock.
Setting the data transmission rate for RS232 connections.
Configuring data bits, stop bits, and parity for RS232 communication.
Using the trigger to allow decoded data transmission to the host.
Understanding how prefixes and suffixes build a message string.
Step-by-step instructions for adding prefixes or suffixes.
Procedures for clearing single or all prefixes/suffixes.
Introduction to changing scan engine output using the Data Format Editor.
Steps to create and save a new data format configuration.
Settings to control data modification according to created formats.
Settings for Codabar symbology, including On/Off and Check Character.
To Next Page
General