52 N3680 Decoded Engine User Guide
No Read
With No Read turned On, the scan engine notifies you if a code cannot be read. If
using an EZConfig-Scanning Tool Scan Data Window (see page 140), an “NR”
appears when a code cannot be read. If No Read is turned Off, the “NR” will not
appear. Default = Off.
If you want a different notation than “NR,” for example, “Error,” or “Bad Code,” you
can edit the output message (see Data Formatting beginning on page 5-61). The
hex code for the No Read symbol is 9C.
To Next Page
Loading...
