Honeywell N3680 - USB PC or Macintosh Keyboard

8 N3680 Decoded Engine User Guide
USB PC or Macintosh Keyboard
Scan one of the following codes to program the scan engine for USB PC Keyboard
or USB Macintosh Keyboard. Scanning these codes also adds a CR suffix. Default =
USB Keyboard (PC).
USB HID
Scan the following code to program the scan engine for USB HID bar code scan-
ners.
USB Serial
Scan the following code to program the scan engine to emulate a regular RS232-
based COM Port. If you are using a Microsoft® Windows® PC, you will need to down-
load a driver from the Honeywell website (www.honeywellaidc.com). The driver will
use the next available COM Port number. Apple® Macintosh computers recognize
the scan engine as a USB CDC class device and automatically use a class driver.
Note: No extra configuration (e.g., baud rate) is necessary.
*
U
S
B
K
e
y
b
o
a
r
d
(
P
C
)
USB Keyboard (Mac)
USB HID Bar Code Scanner
USB Serial