Honeywell N3680 - Page 38

22 N3680 Decoded Engine User Guide
Default = Control + X Mode Off.
Turbo Mode: The scan engine sends characters to a terminal faster. If the terminal
drops characters, do not use Turbo Mode. Default = Off
Numeric Keypad Mode: Sends numeric characters as if entered from a numeric
keypad. Default = Off
Automatic Direct Connect Mode: This selection can be used if you have an IBM AT
style terminal and the system is dropping characters. Default = Off
Windows Mode Control + X
Mode On
* Control + X Mode Off
DOS Mode Control + X Mode On
Windows Mode Prefix/Suffix
Turbo Mode On
* Turbo Mode Off
Numeric Keypad Mode On
* Numeric Keypad Mode Off
Automatic Direct Connect
Mode On