PAGE - 18 Manuale di installazione AM-8000
NOTIFIER ITALIA Doc. 160.1-AM8000-ITA Rev A.3 AM8000_manu-inst
Display -Si TFT 7”wide (800x3rgbx480) with resistive touch screen. Antiglare surface.
LED Backlite software controlled.
Keyboard
5 buttons + touch screen
Buzzer Monotone
Real Time Clock Internal RTC with replaceable battery
Power Supply When installed inside the Black Box, the LCD-8000 is powered from the Panel with a flat Cable (max 2 mt))
When installed outside the Black Box , the
CAN-LCD-8000 card must be used and an external power ( min
18Vcc a - max 40Vcc ) must be provided
Operating Temperature –5°C a +40°C
Humidity Max 95% no condensation
Stockage temperature –10°C a +50°C
Current consumption
LCD-8000-L
backlight low: 148mA in Normal condition; 218mA in alarm condition @ 24Vcc
LCD-8000-F
full backlight: 236mA in Normal condition; 274mA in alarm condition @ 24Vcc
CAN-LCD-8000 16mA @ 24Vcc
CAN-LCD-8000 card
CNFR : 10 pins connector to connect the LCD in a remote mode
1
VPP LA
2
GNDP
External Power supply for side A : min.18 Vdc – max.40 Vdc.
Protected with a 1A35 Fuse.
3
CDA HA
4
GND
5
CDA LA
CanBus side A Communication
6
VPP LB
7
GNDP
External Power supply for side B : min.18 Vdc – max.40 Vdc.
Protected with a 1A35 Fuse.
8
CDA HB
9
GND
10
CDA LB
CanBus side B Communication
To Next Page
Loading...
