64 N16 Instruction Manual P/N LS10239-000NF-E:A 04/20/2021
Operations Other Events
4.8 Other Events
Events listed as Other are as follows:
– CO Pre-Alarm (blue)
– Critical Processes (yellow)
– Security (blue)
– Pre-Alarm (red)
– Hazard/Weather Alert (Yellow)
Responding to an Other Event:
• The Informational Text Area on the screen will indicate step by step what needs to be done to acknowledge and silence the event.
• Tap on the
ACKNOWLEDGE touchpoint located in the Header Bar. The acknowledge touchpoint will be highlighted in blue. A check
mark will appear next to the acknowledged event.
•
BLOCK ACKNOWLEDGE allows for multiple events to be acknowledged at once.
• Tap on the SILENCE touchpoint located in the Header Bar. The SILENCE icon in the Alert Bar will illuminate yellow once the N16 is
silenced.
• Once all the events have been acknowledged the blue highlight indicator will move from the ACKNOWLEDGE touchpoint to the SILENCE
touchpoint.
•Tap
RESET for a latched event.
NOTE: When more than one of these conditions have been activated, they will be listed in order of priority. CO-Pre Alarm will be listed first,
followed by Critical Processes, Security, Pre-Alarm and Hazard/Weather Alert.
1:38:06PM
CO ALARM
SUPERVISORY
TROUBLE
DISABLE
SIGNALS
SILENCED
FIRE ALARM
SECURITY ALARM
SECURITY ALARM
SECURITY L
First Floor, Guest Room
Zone Z553 (Z553)
Thu 02/22/18
1:52:57 PM
NO25L01M011
Step 1 Acknowledge each event. This is secondary text to explain what acknowledging an event means and who should do it.
UNACKNOWLEDGED SECURITY ALARMS(1)
OTHER
1
Figure 6 Other Event Screen
To Next Page
Loading...
Need help?
General
