Honeywell NOTIFIER NFW-100X

NFW-100X Manual — P/N LS10131-001NF-E:C 7/25/2018 41
Optional Module Installation Installation
N- ANN-I/O LED Driver Module
 N- ANN-I/O Board Layout
Figure 2.22 illustrates the N-ANN-I/O board showing locations of screw terminals for connection to the FACP, pin connectors for con-
necting LEDs and the DIP switch for selecting the ANN-BUS ID number.

Specifications
• Max. ANN-BUS Voltage: 24 VDC
• Max. Current:
 Alarm: 200 mA
 Standby: 35 mA
 Each LED: 10 mA
• Operating Temperature: 32°F to 120°F (0°C to 49°C)
• For indoor use in a dry location only
1
10
11
20
21
30
31
40
LED Out
LED Power
not used
LED Out
LED Power
not used
LED Out
LED Power
not used
LED Out
LED Power
not used
ANN-BUS (ID#)
Address Dip switch
ANN-BUS Connector
a
n
n
-
i
o
b
r
d
2
.
w
m
f
Figure 2.22 ANN-I/O Board Layout