EasyManuals Logo

Honeywell NTSC User Manual

Honeywell NTSC
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #73 background imageLoading...
Page #73 background image
Document 800-09312V2 Rev A 73
08/2012
C
Specifications
Note These specifications refer to all models, except where otherwise noted.
Specifications are subject to change without notice.
Video Signal Specifications NTSC PAL
Scanning System: Progressive
Image Sensor: 1/4” CMOS
Number of Pixels (H x V): 1280 x 720 (HD45IP/HD45IPX)
640 x 480 (HD44IP/HD44IPX)
Minimum Illumination: 0.25 lux @ 50 IRE, F1.4
0.11 lux @ 30 IRE, F1.4
Video Output (local): 1.0 Vp-p @ 75 Ohms
S/N Ratio: 50 dB or more (AGC off)
Auto Gain Control (AGC): Off/On, selectable (10 – 40 dB)
Auto Electronic Shutter (ELC): 1/60 – 1/24,500 sec 1/50 – 1/24,500 sec
Automatic Lens Iris Control: DC Iris level 1 – 25
White Balance (AWB): AWC, AWC Push, Manual
Lens Type: 3.3 mm to 12.0 mm Vari-focal Auto Iris, F1.4
Electrical Specifications
Input Voltage: 24 V AC, PoE IEEE 802.3af, Class 1
Input Voltage Range: 17 – 28 V AC
Surge Suppression: 1.5 kW transient
Power Consumption: 3.5 W (max)
Mechanical
Dimensions (W x H): See diagrams (Figure C-1, Figure C-2)
Weight: 1.0 lb (0.448 kg) camera only
Construction: Housing: Polycarbonate
Finish: Matte texture, off-white
Connectors: Local Video Output (AUX): 2-pin Molex connector
Power Input: Removable screw block
Network: RJ45 connector
Environmental
Temperature: Operating: 14°F to 122°F (-10°C to 50°C)
Storage: -40°F to 158°F (-40°C to 70°C)
Relative Humidity: 0% to 85%, non-condensing

Table of Contents

Other manuals for Honeywell NTSC

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell NTSC and is the answer not in the manual?

Honeywell NTSC Specifications

General IconGeneral
BrandHoneywell
ModelNTSC
CategoryIP Camera
LanguageEnglish

Related product manuals