14
SCANNER OPERATION
Failure Mode Indicators
Flashing Blue with One Razzberry Tone
This indicates that the scanner has experienced a laser subsystem failure.
Return the unit to an authorized service center for repair.
Synchronized Flashing of Blue and White with Two Razzberry Tones
This indicates that the scanner has experienced a motor failure. Return the unit
to an authorized service center for repair.
Three Beeps - On Power Up
If the scanner beeps three times on power up, then the nonvolatile memory
that holds the scanner configuration may have failed. First, check the
scanner’s settings. Then, try to re-configure the scanner. If the problem
persists return the unit to an authorized service center for repair.
To Next Page
Loading...
