PX4i and PX6i High Performance Printer User Guide 119
Media Width Excluding Liner (c)
Label Length (d)
Note: Under ideal circumstances, a minimum label length of 4 mm (0.16 in) could be used.
It requires the sum of the label length (d) and the label gap (e) to be larger than 7 mm
(0.28 in), that batch printing is used, and that no pull back of the media is performed.
Honeywell does not guarantee that such short labels will work, but it is up to users to
test this in their unique application.
Label Gap (e)
The Label Stop Sensor (LSS) must be able to detect the extreme front edges of the
labels.
Printer Measurement Value
PX4i Maximum 118.4 mm (4.66 in)
Minimum 23.8 mm (0.94 in)
PX6i Maximum 168.4 mm (6.63 in)
Minimum 74.4 mm (2.93 in)
Measurement Value
Minimum without LTS 8 mm (0.32 in)
Minimum with LTS 12 mm (0.47 in)
Maximum 6,143 mm (241 in) Depends on SDRAM size.
Measurement Value
Maximum 25.0 mm (0.98 in)
Recommended 3.0 mm (0.12 in)
Minimum 1.2 mm (0.05 in)
To Next Page
Loading...
Need help?
General
