Name: Honeywell PX4i
Brand: Honeywell
Rating: 4 (1 reviews)

To Next Page

To Previous Page

12 PX4i and PX6i High Performance Printer User Guide

12. Adjust the position of the green edge guides so that the media is guided with a

minimum of play.

13. Close the front door and media cover. Make sure that the media runs through

the slot in the front door.

14. Press to advance the media and adjust the media feed. Tear off the media

by grabbing the outer edge and pulling it downwards.

Loading Media for Peel-Off Printing

In peel-off, or self-strip mode, self-adhesive labels are separated from the liner

immediately after printing. Peel-off printing:

• can only be used for self-adhesive labels with liner.

• requires the optional peel-off assembly.

• cannot be performed with the optional fanfold guide installed.

• sets high demands on the media, such as label stiffness, release characteristics

of the adhesive and liner, and resistance against electrostatic charging. Consult

Feed

Questions and Answers:

Need help?

Do you have a question about the Honeywell PX4i and is the answer not in the manual?

Honeywell PX4i Specifications

General