Honeywell PX4i User Manual

PX4i and PX6i High Performance Printer User Guide 131
Test/Service Parameters
Media Parameters
Configuration Parameters
Parameter Default Value
Testprint
Config
Test labels
Format
Page
UDC
Font
N/A
Data dump No
Memory reset All
LSS test N/A
Cmd language N/A
Parameter Default Value
Media type Gap
Paper type DT (Direct Thermal)
LBL length dots 1200 dots
Testfeed mode Fast
Sensitivity 420
Darkness 0%
LBL rest point 0
Form adj dots X 0
Form adj dots Y 0
Ribbon low 0
Paper low 0
Parameter Default Value
Emulation mode None
Print speed 4 in/sec
Cutter Not installed
LTS calibration Not installed

Honeywell PX4i Specifications

General

Print Technology	Thermal Transfer
Resolution	300 dpi
Max Print Width	4.09 inches
Max Print Speed	10 ips (inches per second)
Connectivity	USB, Serial, Ethernet
Memory	16 MB Flash, 32 MB SDRAM
Supported Media Types	Labels, tags
Supported Media Width	19 mm (0.75 in) to 110 mm (4.33 in)