PX4i and PX6i High Performance Printer User Guide 79
To configure 802.1x settings
1. Click Network Admin > 802.1x.
2. View or update your settings.
3. Click Submit 802.1x settings.
Use the following table to understand the 802.1x settings.
Setting Description
EAP Type Choose the Extensible Authentication Protocol (EAP) type:
•TTLS
•LEAP
•PEAP
•EAP-FAST
• Off (disables 802.1x security) (default)
Inner Authentication
(TTLS, EAP-FAST, and
PEAP only)
Choose the inner authentication method:
• PAP (TTLS only)
• MSCHAPv2
• EAP/MSCHAPv2
•EAP/MD5
•EAP/GTC
Outer Name (TTLS only) Specify the EAP identity passed in the clear. The default is anonymous.
PAC- Key A-ID Info The Protected Access Credential (PAC) setting is used to specify the
PAC file used by EAP-FAST authentication. This setting is automatically
filled up by the printer if ACQUIRE_PAC is enabled and current installed
PAC file fails authenticating the printer to the network. You can manually
import a PAC file using a pass phrase the same way you install a
certificate.
Automatic Provision
(PAC)
Set Automatic PAC file Provisioning to on or off.
To Next Page
Loading...
Need help?
General
