38 EDA51 User Guide
4. Take one of the following actions:
• Tap the profile name field, and then add a new name.
OR
• Tap the select an application option, and then choose an app from the list.
The new profile appears on the Internal Scanner profile list. You can now select and
modify the scan settings for the new profile.
Delete a Scan Setting Profile
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Honeywell Settings > Scan Settings > Internal Scanner.
3. Tap and hold the profile you want to delete.
4. Select Delete, then select OK.
About ScanHandle Settings
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Honeywell Settings > ScanHandle Settings.
3. Tap Enable scanHandle to turn the feature on.
A preview of the button appears at the bottom of the screen. Attach the
scan handle to the EAD51 mobile computer for easier grip and trigger action when
scanning labels.
About the Optional Digital Scan Button
By default, the imager is enabled for scanning with the left, middle and right scan
buttons configured to trigger the imager. If your application environment requires
use of an on-screen scan button, enable the Digital Scan Button feature in the
Settings app. Once enabled, you can then modify the appearance of the on-screen
Scan button and select the apps the button appears in.
Enable and Configure the Digital Scan Button
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Honeywell Settings > Digital Scan Button.
3. Tap Enable Digital Scan Button to turn the feature on. A preview of the button
appears at the bottom of the screen.
To Next Page
Loading...
Need help?
General