Honeywell ScanPal EDA51 Series User Manual

EDA51 User Guide 65
7. (Optional) Once paired to a device, you can connect manually to the device. Tap
the device under Paired devices. The word “Connected” appears under the
paired device name.
The status icon changes from to .
Note: To disconnect a paired device, tap next to the name of the paired device and then
tap Forget.
Rename the Computer and View File History
You can change the name of the computer to make it easier to identify when
pairing with other Bluetooth enabled devices and view statistics about received
files.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Connected devices > Bluetooth.
3. Tap Device Name. Type the new name and then select Rename.

Honeywell ScanPal EDA51 Series Specifications

General

Display Size	5.0 inches
Operating Temperature	-10°C to 50°C (14°F to 122°F)
Drop Specification	1.2 m (4 ft) to concrete
IP Rating	IP64
Processor	Qualcomm Snapdragon 450, 1.8 GHz octa-core
Camera	13 MP rear
Battery	4000 mAh
Connectivity	Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 4.2
Scanner	1D/2D barcode scanner
Storage Temperature	-20°C to +70°C (-4°F to +158°F)
GPS	Yes
Display Resolution	1280 x 720
Storage	16 GB