Honeywell ScanPal EDA51 Series User Manual

EDA51 User Guide 49
Record a Video
This section explains how to record video with the camera in the computer.
1. Tap the Snapdragon Camera icon in the favorites tray.
2. Tap mode selection in the bottom right corner of the app.
3. Tap to select video.
4. Tap to begin recording video. To zoom in or out, pinch or spread your fingers
apart.
5. When you are done recording, tap .
Change Video Settings
You can change the video settings for best results when recording video.
1. Open the Snapdragon Camera app .
2. Tap to select video.
3. At the top of the screen, select any of the following to adjust the settings.
• Color Filter
Stylize your video by applying a filter. Options include: None, Mono, Sepia,
Negative, Solarize, Posterize, Aqua, Emboss, Sketch, Neon.
• Sound/Microphone
Tap to quickly toggle sound recording On or Off.
• Advanced Settings
Manually set advanced features. Options include: Flash, Video quality, Video
duration, GPS location, Storage, White balance, Video High FrameRate and
Image stabilization.
Color Filters Sound/
Microphone
Advanced
Settings

Honeywell ScanPal EDA51 Series Specifications

General

Display Size	5.0 inches
Operating Temperature	-10°C to 50°C (14°F to 122°F)
Drop Specification	1.2 m (4 ft) to concrete
IP Rating	IP64
Processor	Qualcomm Snapdragon 450, 1.8 GHz octa-core
Camera	13 MP rear
Battery	4000 mAh
Connectivity	Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 4.2
Scanner	1D/2D barcode scanner
Storage Temperature	-20°C to +70°C (-4°F to +158°F)
GPS	Yes
Display Resolution	1280 x 720
Storage	16 GB