Honeywell ScanPal EDA52 User Manual

EDA52 User Guide 9
3. Slide the battery latch to the left.
4. Attach the hand strap.
5. Press the Power button.
About the Battery Status
Use the battery icon in the Status bar at the top of the screen to see the charge
level of your battery. If you want more detailed information on your battery, such as
usage time or charge remaining on the battery, open the Settings app and tap
Battery.
Battery Status Icons
Icon Status
The battery charge is at 100%.
The battery charge is at 50%.
The battery charge is low. You need to charge or replace the battery soon.
The battery is critically low. You need to replace the battery now or connect the computer
to a charging accessory.
The computer is connected to external power and the battery is charging.
There is a battery error. Install another battery. If the problem persists, call Honeywell
Technical Support.

Honeywell ScanPal EDA52 Specifications

General

Battery Capacity	4000 mAh
Camera	13 MP rear, 5 MP front
Scanning	1D/2D barcode scanning
Ruggedness	IP67
RAM	4 GB
Storage	32 GB
Expandable Storage	microSD up to 128 GB
Connectivity	Wi-Fi 802.11 a/b/g/n/ac, LTE
Bluetooth Version	Bluetooth 5.0
Display Size	5.5 inches