Need help?Do you have a question about the Honeywell Searchline Excel and is the answer not in the manual?
Critical safety warnings for operation and installation.
Important safety advice and precautions.
General notices regarding use and manual accuracy.
Describes the Searchline Excel system and its versions.
Explains symbols used for warnings and notes in the manual.
General introduction to the overview section.
Details the infrared beam transmitter unit.
Details the infrared receiver unit and its function.
Describes the mounting brackets for alignment.
Introduces installation and operation guidelines.
Guidance on selecting location and mounting the units.
Specifies wiring and earthing requirements.
Details power requirements and connections.
Instructions for unpacking the equipment.
Step-by-step guide for mechanical and electrical installation.
Procedures for aligning and commissioning the system.
Steps to calibrate the system controller.
Guidance on performing installation checks.
Routine checks and cleaning procedures.
Method for functional testing using filters.
Procedure for calibration verification with a gassing cell.
How to view current gas readings.
Routine verification for FM approval.
Lists common problems, causes, and remedies.
Technical specifications for system parameters.
Lists gases the detector can identify.
Overview of system certifications and approvals.
Details ATEX and IECEx certification information.
Details UL certification information.
Details CSA and FM certification information.
Essential operations for the interrogator.
Describes the interrogator's menu structure.
Menu options for system calibration.
Technical specifications for the interrogator.
Definitions of technical terms.
List of common abbreviations.
Lists available system units and part numbers.
To Next Page
General