Honeywell Searchline Excel - Page 41

41
MAN0530 Issue 10 - 11/09 Searchline Excel
2104M0506
3.7.5 Commissioning the Gas Detector
This process consists of the following steps:
• ConnecttheHandheldInterrogatortothegasdetector
 • Power-upthegasdetectorandcheck/setthemodeoftheInterrogatorfor
operation with the installed Excel gas detector
 • Setthegasdetectorreal-timeclock
 • Completethealignmentprocess
 • Finishup
Connecting the Interrogator
Connect the SHC1 Handheld Interrogator to the gas detector in one of the following ways:
• via a Honeywell Analytics DVC100(M) MK2 or DX100(M) Junction Box - connect the
Interrogator directly to the junction box via its IS socket, e.g.
ESC
Calibrator
Type SHC1
3. INSTALLATION AND OPERATION
Distant Excel
unit
Cross-hairs
After alignment